Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1251 / 1640

Router Information Protocol (RIP) | 1251
Command
History
timers basic
c e s
Manipulate the RIP timers for routing updates, invalid, holddown times and flush time.
Syntax timers basic update invalid holddown flush
To return to the default settings, enter no timers basic .
Parameters
Defaults update
= 30 seconds;
invalid
= 180 seconds;
holddown
= 180 seconds;
flush
= 240 seconds.
Command Modes
ROUTER RIP
Command
History
Usage
Information
If the timers on one router are changed, the timers on all routers in the RIP domain must also be
synchronized.
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series
update Enter the number of seconds to specify the rate at which RIP routing updates are sent.
Range: zero (0) to 4294967295.
Default: 30 seconds.
invalid
Enter the number of seconds to specify the time interval before routing updates are
declared invalid or expired. The
invalid
value should be at least three times the
update
timer value.
Range: zero (0) to 4294967295.
Default: 180 seconds.
holddown
Enter the number of seconds to specify a time interval during which the route is marked as
unreachable but still sending RIP packets. The
holddown
value should be at least three
times the
update
timer value.
Range: zero (0) to 4294967295.
Default: 180 seconds.
flush Enter the number of seconds to specify the time interval during which the route is
advertised as unreachable. When this interval expires, the route is flushed from the routing
table. The
flush
value should be greater than the
update
value.
Range: zero (0) to 4294967295.
Default is 240 seconds.
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series