Dell Force10 TeraScale C Series, Справочное руководство

Страница: 345 / 1640

Border Gateway Protocol IPv4 (BGPv4) | 345
neighbor distribute-list
c e s
Distribute BGP information via an established prefix list.
Syntax neighbor { ip-address | peer-group-name } distribute-list prefix-list-name { in | out }
To delete a neighbor distribution list, use the no neighbor { ip-address | peer-group-name }
distribute-list prefix-list-name { in | out } command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGP
Usage
Information
Other BGP filtering commands include: neighbor filter-list , ip as-path access-list , and neighbor
route-map .
Related
Commands
Command
History
neighbor ebgp-multihop
c e s
Attempt and accept BGP connections to external peers on networks that are not directly connected.
Syntax neighbor { ip-address | peer-group-name } ebgp-multihop [ ttl ]
To disallow and disconnect connections, use the no neighbor { ip-address | peer-group-name }
ebgp-multihop command.
Parameters
Defaults Disabled.
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group to apply the distribute list filter to all routers
in the peer group.
prefix-list-name Enter the name of an established prefix list.
If the prefix list is not configured, the default is permit (to allow all routes).
in
Enter the keyword
in
to distribute only inbound traffic.
out
Enter the keyword
out
to distribute only outbound traffic.
ip as-path access-list Configure IP AS-Path ACL.
neighbor filter-list Assign a AS-PATH list to a neighbor or peer group.
neighbor route-map Assign a route map to a neighbor or peer group.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
ttl (OPTIONAL) Enter the number of hops as the Time to Live (ttl) value.
Range: 1 to 255.
Default: 255