Dell Force10 TeraScale C Series, Справочное руководство

Страница: 763 / 1640

IPv6 Border Gateway Protocol (IPv6 BGP) | 763
Command Modes
ROUTER BGP
Command
History
neighbor distribute-list
c e
Distribute BGP information via an established prefix list.
Syntax neighbor
{
ipv6-address
|
peer-group-name
}
distribute-list prefix-list-name
{
in
|
out
}
To delete a neighbor distribution list, use the
no neighbor
{
ipv6-address
|
peer-group-name
}
distribute-list prefix-list-name
{
in
|
out
} command.
Parameters
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command
History
Usage
Information
Other BGP filtering commands include: neighbor filter-list and neighbor route-map .
Related
Commands
neighbor ebgp-multihop
c e
Attempt and accept BGP connections to external peers on networks that are not directly connected.
Syntax neighbor { ipv6-address | peer-group-name } ebgp-multihop [ ttl ]
To disallow and disconnect connections, use the no neighbor { ipv6-address | peer-group-name }
ebgp-multihop [ ttl ] command.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address
Enter the IPv6 address in the
x:x:x:x::x
format.
The
::
notation specifies successive hexadecimal fields of zeros.
peer-group-name Enter the name of the peer group.
prefix-list-name Enter the name of an established prefix list.
If the prefix list is not configured, the default is permit (to allow all
routes).
in
Enter the keyword
in
to distribute only inbound traffic.
out
Enter the keyword
out
to distribute only outbound traffic.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
neighbor filter-list Assign a AS-PATH list to a neighbor or peer group.
neighbor route-map Assign a route map to a neighbor or peer group.