Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1114 / 1640

1114 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
show ip pim snooping neighbor
e
x
Display information on PIM neighbors learned through PIM-SM snooping.
Syntax show ip pim snooping neighbor [vlan vlan-id ]
Parameters
Command Modes EXEC
EXEC Privilege
Command
History
Example Figure 41-9. show ip pim snooping neighbor Command Example
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about PIM neighbors that was
discovered by PIM-SM snooping on a specified VLAN.
Valid VLAN IDs: 1 to 4094.
Version 8.4.1.1 Introduced on E-Series ExaScale
Table 41-4. show ip pim snooping neighbor Command Example Fields
Field Description
Neighbor address Displays the IP address of the neighbor learned through PIM-SM
snooping.
Interface Displays the VLAN ID number and slot/port on which the
PIM-SM-enabled neighbor was discovered.
Uptime/expires Displays the amount of time the neighbor has been up followed by the
amount of time until the neighbor is removed from the multicast routing
table (that is, until the neighbor hold time expires).
Ver Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use ip pim dr-priority )
• DR = Designated Router
• S = Sparse mode
FTOS# show ip pim snooping neighbor
Neighbor Interface Uptime/Expires Ver DR Prio
Address
165.87.32.2 Vl 2 [Gi 4/13 ] 00:04:03/00:01:42 v2 1
165.87.32.10 Vl 2 [Gi 4/11 ] 00:00:46/00:01:29 v2 0
165.87.32.12 Vl 2 [Gi 4/20 ] 00:00:51/00:01:24 v2 0