manualshive.com logo in svg

Dell Force10 TeraScale C Series, Справочное руководство

Поделиться
Скачать
Dell Force10 TeraScale C Series Скачать руководство пользователя страница 622

622

|

Interfaces

www.dell.com | support.dell.com

Example

Figure 23-45.  show interfaces port-channel Command Example (EtherScale) 

Version 7.5.1.0

Introduced for C-Series

E-Series legacy command

Table 23-12.  show interfaces port-channel Command Example Fields  

Field

Description

Port-Channel 1...

Displays the LAG’s status. In the example, the status of the LAG’s LAG 
fate-sharing group (“Failover-group”) is listed.

Hardware is...

Displays the interface’s hardware information and its assigned MAC 
address.

Port-channel is part...

Indicates whether the LAG is part of a LAG fate-sharing group 
(“Failover-group”).

Internet address...

States whether an IP address is assigned to the interface. If one is, that 
address is displayed.

MTU 1554...

Displays link and IP MTU.

LineSpeed

Displays the interface’s line speed. For a port channel interface, it is the 
line speed of the interfaces in the port channel.

Members in this...

Displays the interfaces belonging to this port channel.

ARP type:...

Displays the ARP type and the ARP timeout value for the interface.

Last clearing...

Displays the time when the 

show interfaces

 counters were cleared.

Queueing strategy.

States the packet queuing strategy. FIFO means first in first out.

 packets input...

Displays the number of packets and bytes into the interface.

Input 0 IP packets...

Displays the number of packets with IP headers, VLAN tagged headers 
and MPLS headers.

The number of packets may not add correctly because a VLAN tagged IP 
packet counts as both a VLAN packet and an IP packet.

FTOS#show interfaces port-channel 20
Port-channel 20 is up, line protocol is up (Failover-group 1 is down)
Hardware address is 00:01:e8:01:46:fa
Port-channel is part of failover-group 1
Internet address is 1.1.120.1/24
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 2000 Mbit
Members in this channel:  Gi 0/5 Gi 0/18 
ARP type: ARPA, ARP timeout 04:00:00
Last clearing of “show interfaces” counters 00:00:00
Queueing strategy: fifo
     44507301 packets input, 3563070343 bytes
     Input 44506754 IP Packets, 0 Vlans 0 MPLS
     41 64-byte pkts, 44502871 over 64-byte pkts, 249 over 127-byte pkts
     407 over 255-byte pkts, 3127 over 511-byte pkts, 606 over 1023-byte pkts
     Received 0 input symbol errors, 0 runts, 0 giants, 0 throttles
     0 CRC, 0 IP Checksum, 0 overrun, 0 discarded
     1218120 packets output, 100745130 bytes, 0 underruns
     Output 5428 Multicasts, 4 Broadcasts, 1212688 Unicasts
     1216142 IP Packets, 0 Vlans, 0 MPLS
     0 throttles, 0 discarded
Rate info (interval 299 sec):
     Input 01.50Mbits/sec,       2433 packets/sec
     Output 00.02Mbits/sec,          4 packets/sec
Time since last interface status change: 00:22:34

FTOS#

Содержание Force10 TeraScale C Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды