Dell Force10 TeraScale C Series, Справочное руководство

Страница: 624 / 1640

624 | Interfaces
www.dell.com | support.dell.com
show port-channel-flow
c e s
Display an egress port in a given port-channel flow.
Syntax show port-channel-flow outgoing-port-channel number incoming-interface interface
{ source-ip address destination-ip address } |
{
protocol number
|
icmp
|
tcp
|
udp
} |
{ source-port number destination-port number } | { source-mac address destination-mac
address }
Parameters
Command Modes EXEC
outgoing-port-channel
number
Enter the keyword
outgoing-port-channel
followed by the
number of the port channel to display flow information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and
1 to 512 for ExaScale.
incoming-interface interface
Enter the keyword
incoming-interface
followed by the interface
type and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a SONET interface, enter the keyword
sonet
followed by the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
source-ip address
Enter the keyword
source-ip
followed by the IP source address in
IP address format.
destination-ip address
Enter the keyword
destination-ip
followed by the IP destination
address in IP address format.
protocol number
|
icmp
|
tcp
|
udp
On the E-Series only, enter the keyword protocol followed by one of
the protocol type
keywords:
tcp
,
udp
,
icmp
or
protocol number
Note: The protocol number keyword applies to E-Series only.
source-port number
Enter the keyword
source-port
followed by the source port
number.
Range: 1-65536
Default: None
destination-port number
Enter the keyword
destination-port
followed by the destination
port number.
Range: 1-65536
Default: None
source-mac address
Enter the keyword
source-mac
followed by the MAC source
address in the nn:nn:nn:nn:nn:nn format.
destination-mac address
Enter the keyword
destination-mac
followed by the MAC
destination address in the nn:nn:nn:nn:nn:nn format.