Dell Force10 TeraScale C Series, Справочное руководство

Страница: 144 / 1640

144 | Control and Monitoring
www.dell.com | support.dell.com
show software ifm
c s
Display interface management (IFM) data.
Syntax show software ifm { clients [ summary ] | ifagt number | ifcb interface | stack-unit unit-ID |
trace-flags }
Parameters
Defaults
None
Command Mode EXEC
EXEC Privilege
Command
History
clients
Enter the keyword
clients
to display IFM client information.
summary
(OPTIONAL) Enter the keyword
summary
to display brief information about IFM
clients.
ifagt number
Enter the keyword
ifagt
followed by the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface
Enter the keyword
ifcb
followed by one of the following interface IDs followed by the
slot/port information to display interface control block information for that interface:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
.
• For a Port Channel interface, enter the keyword
port-channel
followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet
.
C-Series options also include:
•
fastethernet
for a Fast Ethernet interface
•
loopback
for a Loopback interface
•
managementethernet
for a Management Ethernet interface
•
null
for a Null interface
•
vlan
for a VLAN interface (Range: 1 to 4094, 1 to 2094 for ExaScale)
stack-unit
unit-ID
Enter the keyword
stack-unit
followed by the stack member number to display IFM
information for that unit.
Range: 0 to 1
Note: This option is only available on S-Series.
trace-flags
Enter the keyword
trace-flags
to display IFM information for internal trace flags.
Version 7.6.1.0 Introduced for C-Series and S-Series