Dell Force10 TeraScale C Series, Справочное руководство

Страница: 194 / 1640

194 | 802.1X
www.dell.com | support.dell.com
dot1x host-mode
c e
t
s
Enable single-host or multi-host authentication.
Syntax dot1x host-mode { single-host | multi-host | multi-auth }
Parameters
Defaults single-host
Command Modes INTERFACE
Command
History
Usage
Information
• Single-host mode authenticates only one host per authenticator port, and drops all other traffic on
the port.
• Multi-host mode authenticates the first host to respond to an Identity Request, and then permits all
other traffic on the port.
• Multi-supplicant mode authenticates every device attempting to connect to the network on through
the authenticator port.
Related
Commands
dot1x mac-auth-bypass
c s
Enable MAC authentication bypass. If 802.1X times out because the host did not respond to the
Identity Request frame, FTOS attempts to authenticate the host based on its MAC address.
Syntax dot1x mac-auth-bypass
Defaults Disabled
Command Modes INTERFACE
Command
History
Usage
Information
To disable MAC authentication bypass on a port, enter the
no dot1x mac-auth-bypass
command.
Related
Commands
single-host
Enable single-host authentication.
multi-host
Enable multi-host authentication.
multi-auth
Enable multi-supplicant authentication.
Version 8.4.1.0 The multi-auth option was introduced on the C-Series and S-Series.
Version 8.3.2.0 The
single-host
and
multi-host
options were introduced on the C-Series,
E-Series TeraScale, and S-Series
show dot1x interface
Version 8.4.1.0 Introduced on C-Series and S-Series
dot1x auth-type
mab-only