Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1065 / 1640

Open Shortest Path First (OSPFv2 and OSPFv3) | 1065
area encryption
e
t
Configure an IPsec encryption policy for OSPFv3 packets in an OSPFv3 area.
Syntax area area-id encryption ipsec spi number esp encryption-algorithm [ key-encryption-type ]
key authentication-algorithm [ key-encryption-type ] key
Parameters
Default Not configured.
Command Modes ROUTER OSPFv3
Command
History
Usage
Information
Before you enable IPsec encryption on an OSPFv3 interface, you must first enable OSPFv3 globally
on the router. You must configure the same encryption policy (same SPI and keys) on each interface in
an OSPFv3 link.
An SPI value must be unique to one IPsec security policy (authentication or encryption) on the router.
Note that when you configure encryption for an OSPFv3 area with the
area encryption
command,
you enable both IPsec encryption and authentication. However, when you enable authentication on an
area with the
area authentication
command, you do not enable encryption at the same time.
If you have enabled IPsec authentication in an OSPFv3 area with the
area authentication
command,
you cannot use the
area encryption
command in the area at the same time.
area area-id
Area for which OSPFv3 traffic is to be encrypted. For area-id , you can enter a
number or an IPv6 prefix.
ipsec spi number Security Policy index (SPI) value that identifies an IPsec security policy.
Range: 256 to 4294967295.
esp
encryption-algorithm
Encryption algorithm used with ESP.
Valid values are: 3DES, DES, AES-CBC, and NULL.
For AES-CBC, only the AES-128 and AES-192 ciphers are supported.
key-encryption-type (OPTIONAL) Specifies if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
key Text string used in encryption.
The required lengths of a non-encrypted or encrypted key are:
3DES - 48 or 96 hex digits; DES - 16 or 32 hex digits; AES-CBC -
32 or 64 hex digits for AES-128 and 48 or 96 hex digits for AES-192.
authentication-algorith
m Specifies the authentication algorithm to use for encryption.
Valid values are
MD5
or
SHA1
.
key-encryption-type (OPTIONAL) Specifies if the authentication key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
key Text string used in authentication.
For MD5 authentication, the key must be 32 hex digits (non-encrypted) or 64
hex digits (encrypted).
For SHA-1 authentication, the key must be 40 hex digits (non-encrypted) or 80
hex digits (encrypted).
null
Causes an encryption policy configured for the area to not be inherited on the
interface.
Version 8.4.2.0 Introduced