manualshive.com logo in svg

Dell Force10 TeraScale C Series, Справочное руководство

Поделиться
Скачать
Dell Force10 TeraScale C Series Скачать руководство пользователя страница 642

642

|

IPv4 Routing

www.dell.com | support.dell.com

Example

Figure 24-3.  debug ip packet Command Example (Partial) 

Usage

Information

Use the 

count

 option to stop packets from flooding the user terminal when debugging is turned on.

The 

access-group

 option supports only the equal to (

eq

) operator in TCP ACL rules. Port operators 

not equal to (

neq

), greater than (

gt

), less than (

lt

), or 

range

 are not supported in 

access-group

 

option (see 

Figure 24-4

). ARP packets (

arp

) and Ether-type (

ether-type)

 are also not supported in 

access-group

 option. The entire rule is skipped to compose the filter.

The 

access-group

 option pertains to:

•

IP Protocol Number 

0 to 255

Table 24-1.  debug ip packet Command Example Fields

Field

Description

s=

Lists the source address of the packet and the name of the interface (in 
parentheses) that received the packet.

d=

Lists the destination address of the packet and the name of the interface 
(in parentheses) through which the packet is being sent out on the 
network.

len

Displays the packet’s length.

sending

rcvd

fragment

sending broad/multicast proto

unroutable

The last part of each line lists the status of the packet. 

TCP src=

Displays the source and destination ports, the sequence number, the 
acknowledgement number, and the window size of the packets in that 
TCP packets.

UDP src=

Displays the source and destination ports for the UDP packets.

ICMP type=

Displays the ICMP type and code.

IP Fragment

States that it is a fragment and displays the unique number identifying the 
fragment (Ident) and the 

offset (in 8-byte units)

 of this fragment 

(fragment offset) from the beginning of original datagram. 

IP: s=10.1.2.62 (local), d=10.1.2.206 (Ma 0/0), len 54, sending
    TCP src=23, dst=40869, seq=2112994894, ack=606901739, win=8191 ACK PUSH
IP: s=10.1.2.206 (Ma 0/0), d=10.1.2.62, len 40, rcvd
    TCP src=0, dst=0, seq=0, ack=0, win=0
IP: s=10.1.2.62 (local), d=10.1.2.206 (Ma 0/0), len 226, sending
    TCP src=23, dst=40869, seq=2112994896, ack=606901739, win=8192 ACK PUSH
IP: s=10.1.2.216 (Ma 0/0), d=10.1.2.255, len 78, rcvd
    UDP src=0, dst=0
IP: s=10.1.2.62 (local), d=10.1.2.3 (Ma 0/0), len 1500, sending fragment
    IP Fragment, Ident = 4741, fragment offset = 0
    ICMP type=0, code=0
IP: s=10.1.2.62 (local), d=10.1.2.3 (Ma 0/0), len 1500, sending fragment
    IP Fragment, Ident = 4741, fragment offset = 1480
IP: s=40.40.40.40 (local), d=224.0.0.5 (Gi 4/11), len 64, sending broad/multicast 
proto=89
IP: s=40.40.40.40 (local), d=224.0.0.6 (Gi 4/11), len 28, sending broad/multicast 
proto=2
IP: s=0.0.0.0, d=30.30.30.30, len 100, unroutable
    ICMP type=8, code=0
IP: s=0.0.0.0, d=30.30.30.30, len 100, unroutable
    ICMP type=8, code=0

Содержание Force10 TeraScale C Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды