Dell Force10 TeraScale C Series, Справочное руководство

Страница: 874 / 1640

874 | Layer 2
www.dell.com | support.dell.com
When you enable sticky MAC-address learning (
sticky
), dynamically-learned MAC addresses of
trusted devices are added to the running configuration and “stick” to the port or VLAN on which they
are learned even if an interface goes down and comes back up. If you save sticky MAC addresses to the
start-up configuration file by entering the
write config
command, the addresses are deleted from the
running-configuration, do not have to be dynamically relearned, and do not change when the switch
reboots. Any sticky MAC addresses learned after the
write config
is performed are not saved after a
reboot.
Related
Commands
mac learning-limit learn-limit-violation
c e s
Configure an action for a MAC address learning-limit violation.
Syntax mac learning-limit learn-limit-violation
{
log
|
shutdown
}
To return to the default, use the
no mac learning-limit learn-limit-violation
{
log
|
shutdown
}
command.
Parameters
Defaults
No default behavior or values
Command Modes
INTERFACE (conf-if- interface - slot/port )
Command
History
Usage
Information
This is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
clear counters
Clear counters used in the
show interface
command
clear mac-address-table
dynamic Clear the MAC address table of all MAC address learned dynamically.
show mac learning-limit Display MAC learning-limit configuration.
log
Enter the keyword
log
to generate a syslog message on a learning-limit
violation.
shutdown
Enter the keyword
shutdown
to shut down the port on a learning-limit
violation.
Version 8.2.1.0 Introduced on S-Series
Version 7.8.1.0 Introduced on C-Series
Version 7.5.1.0 Introduced on E-Series
show mac learning-limit Display details of the mac learning-limit