50
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuration (continued)
Configuration
DWS-1008#
show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5 retrans=3
deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server Addr
Ports
T/o Tries Dead State
--------------------------------------------------------------------------------------
svr1 10.10.70.20 1812 1813 5
3 0 UP
svr2 10.10.70.40 1812 1813 5
3 0 UP
Server groups
grp1 (load-balanced): svr1 svr2
set authentication dot1x ssid private_wlan EXAMPLE\* peap-mschapv2 grp1
Displaying and Saving the Configuration
MSS immediately implements configuration changes by updating the device’s running
configuration. The software does not automatically retain configuration changes after
a software reboot or a power cycle. To review and save configuration changes, use the
following commands:
show config
[area area] [all]
save config
The show config command without the all option displays only those configuration changes
that are different from the default settings of the switch and its access points. The all option
displays the entire configuration including the default values of all parameters.