D-Link DWS-1008 Скачать руководство пользователя страница 37

Страница: 37 / 454

DWS-1008 User’s Manual

D-Link Systems, Inc.

Conﬁguration (continued)

Conﬁguration

DNS - If the intermediate network between the switch and Distributed AP includes one or

more IP routers, create a TRPZ.mynetwork.com or wlan-switch.mynetwork.com entry on the

DNS server. The entry needs to map one of these names to the system IP address of the

switch.

The DNS entry allows the AP to communicate with a switch that is not on the AP’s subnet.

If the AP is unable to locate a switch on the subnet it is connected to, the AP sends DNS

requests to both TRPZ and wlan-switch, where the DNS sufﬁx for mynetwork.com is learned

through DHCP.

• If only TRPZ is deﬁned in DNS, the AP contacts the switch whose IP address is

returned for TRPZ.

• If only wlan-switch is deﬁned in DNS, the AP contacts the switch whose IP address

is returned for wlan-switch.

• If both TRPZ and wlan-switch are deﬁned in DNS, the AP contacts the switch whose

IP address is returned for TRPZ. The AP ignores the IP address returned for wlan-

switch.

• If both TRPZ and wlan-switch are deﬁned in DNS, and the AP is unable to contact

the IP address returned for TRPZ, the AP never contacts the IP address returned for

wlan-switch. The AP does not boot.

After the AP contacts the switch, the switch relays information about DWS-1008 switches in

the network that contain a Distributed AP conﬁguration speciﬁc to that Distributed AP.

Caution:

Do not enable PoE on network ports unless you intend to power a third-party

device. If you enable PoE under other conditions, power can damage the device.

Содержание DWS-1008







































































































































































































































































































































































































































































Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды

D-Link DWS-1008, Руководство пользователя

Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды