300
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring AAA for Network Users
Assigning a Security ACL to a User or a Group
Once a security access control list (ACL) is defined and committed, it can be applied
dynamically and automatically to users and user groups through the 802.1X authentication
and authorization process. When you assign a Filter-Id attribute to a user or group, the security
ACL name value is entered as an authorization attribute into the user or group record in the
local database or RADIUS server.
Note:
If the Filter-Id value returned through the authentication and authorization process
does not match the name of a committed security ACL in the DWS-1008 switch, the user fails
authorization and cannot be connected.
Assigning a Security ACL Locally
To use the local DWS-1008 switch database to restrict a user, a MAC user, or a group of
users or MAC users to the permissions stored within a committed security ACL, use the
following commands:
Security ACL Target
Commands
User authenticated by a
password
set user
username
attr filter-id
acl-name
.in
set user
username
attr filter-id
acl-name
.out
Group of users authenticated by
a password
set usergroup
groupname
attr filter-id
acl-name
.in
set usergroup
groupname
attr filter-id
acl-name
.out
User authenticated by a MAC
address
set mac-user
username
attr filter-id
acl-name
.in
set mac-user
username
attr filter-id
acl-name
.out
Group of users authenticated by
a MAC address
set mac-usergroup
groupname
attr filter-id
acl-name
.
in
set mac-usergroup
groupname
attr filter-id
acl-name
.
out
You can set filters for incoming and outgoing packets:
•
Use
acl-name
.in
to filter traffic that enters the switch
from users
via an DWL-8220AP
access port or wired authentication port, or from the network via a network port.
•
Use
acl-name
.out
to filter traffic sent from the switch
to users
via an DWL-8220AP
access port or wired authentication port, or from the network via a network port.
For example, the following command applies security ACL
acl-101
to packets coming into the
DWS-1008 switch from user
Jose
:
DWS-1008#
set user Jose attr filter-id acl-101.in
success: change accepted.