D-Link DWS-1008 Скачать руководство пользователя страница 407

Страница: 407 / 454

402

DWS-1008 User’s Manual

D-Link Systems, Inc.

Appendix B - Supported RADIUS Attribites

Class

Yes

If received, this information must be

sent on, without interpretation, in all

subsequent packets sent to the RADIUS

server for that client session.

Vendor-

Speciﬁc

Yes

String. Allows MSS to support D-Link

VSAs.

Session-

Timeout

Yes

Maximum number of seconds of service

allowed the user before reauthentication

of the session.

Note.

If the global reauthentication

timeout (set by the

set dot1x reauth-

period

command) is shorter than the

session-timeout, MSS uses the global

timeout instead.

Called-

Station-

Yes

For IEEE 802.1X authenticators, stores

the DWL-8220AP access point MAC

address in uppercase ASCII format, with

octet values separated by hyphens (for

example, 00-10-A4-23-19-C0).

Calling-

Station-Id

Yes

For IEEE 802.1X authenticators,

stores the supplicant MAC address

in uppercase ASCII format, with octet

values separated by hyphens (for

example, 00-10-A4-23-19-C0).

NAS-

Identiﬁer

Yes

Name of the RADIUS client originating

an Access-Request. The value in the

current release is

trapeze

and cannot be

changed.

Acct-Status-

Type

Yes

Valid values:
•  Acct-Start
•  Acct-Interim-Update
•  Acct-Stop

Acct-Delay-

Time

Yes

Time in seconds for which the client has

been trying to send the record.

Содержание DWS-1008







































































































































































































































































































































































































































































Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды

D-Link DWS-1008, Руководство пользователя

Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды