D-Link DWS-1008 Скачать руководство пользователя страница 213

Страница: 213 / 454

208

DWS-1008 User’s Manual

D-Link Systems, Inc.

Wi-Fi Multimedia

Wi-Fi Multimedia

MSS supports Wi-Fi Multimedia (WMM). WMM provides wireless Quality of Service for

time-sensitive applications such as voice and video. WMM is a pre-standard version of IEEE

802.11e, provided by the Wi-Fi Alliance to enable vendors to provide interoperable multimedia

support before ratiﬁcation of the standard.

WMM maps priority information between wired and wireless packets, so that high priority

trafﬁc receives end-to-end high priority treatment through the network. WMM is enabled by

default and does not require any conﬁguration. You can disable the feature on individual radio

proﬁles.

Note:

MSS also can support non-WMM VoIP devices. However, to provide priority service to

non-WMM VoIP trafﬁc, you must conﬁgure an ACL to set the CoS (Case of Service) for the

trafﬁc. The AP maps this CoS value to a forwarding queue.

How WMM Works in MSS

DWS-1008 switches support WMM by tagging QoS information in packets. MSS classiﬁes QoS

information in a packet received by the switch. MSS then tags the packet’s QoS information

before forwarding the packet. Depending on the destination, MSS can set QoS information

by setting a packet’s 802.1p value or by setting the IP ToS value in the IP tunnel header, if the

trafﬁc is tunneled. MSS does not change the IP ToS value in the data packets themselves.

QoS on the DWS-1008 Switch

The switch obtains an inbound packet’s QoS value from the packet’s Layer 2 802.1p or Layer

3 IP ToS value. Depending on the destination, the switch maps the QoS information to other

parts of the packet before forwarding it. If a packet has both 802.1p and IP ToS information,

the switch sets QoS for the packet based on the IP ToS value.

However, if an ACL is mapped to the outbound trafﬁc direction on the AP port, Distributed

AP, or user VLAN, the switch sets QoS based on the CoS value in the ACL, regardless of the

802.1p and IP ToS values in the packet.

•

If the switch is forwarding a packet to an AP, MSS encapsulates the packet in an IP

tunnel, and marks the IP ToS value in the tunnel header based on the incoming QoS

value. This occurs for directly connected APs and for Distributed APs. The switch never

changes the data packet’s IP ToS value.

•

If the DWS-1008 is forwarding a packet through a tunnel to another switch, MSS uses

the same process used for trafﬁc to an AP. Generally, a switch uses a tunnel to send

user data to another DWS-1008 switch when the user’s VLAN is conﬁgured on the

other switch but not on the local switch.

•

If the switch is forwarding a packet on a wired interface that has an 802.1Q VLAN tag,

the switch sets the packet’s 802.1p value based on the incoming QoS value.

• If the switch is forwarding a packet to a non-tagged wired interface, and the trafﬁc is not

tunneled, the switch does not set the data packet’s 802.1p value.

Содержание DWS-1008







































































































































































































































































































































































































































































Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды

D-Link DWS-1008, Руководство пользователя

Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды