D-Link DWS-1008 Скачать руководство пользователя страница 93

Страница: 93 / 454

DWS-1008 User’s Manual

D-Link Systems, Inc.

Conﬁguring and Managing IP Interfaces and Services

• If the address is not in use, MSS conﬁgures the VLAN that has the DHCP client

enabled with the IP address received from the DHCP server. MSS then conﬁgures

the other values as follows:

• Default gateway - MSS adds a default route for the gateway, with a

metric

of 10.

• DNS domain name and DNS server IP address - If the default domain

name and DNS server IP address are already conﬁgured on the switch,

and DNS is enabled, the conﬁgured values are used. Otherwise, the

values received from the DHCP server are used.

• If the address offered by the DHCP server is already in use, MSS sends a DHCP

Decline message to the server and generates a log message.

• If the address is in a subnet that is already conﬁgured on another VLAN on the

switch, MSS sends a DHCP Decline message to the server and generates a log

message.

If the switch is powered down or restarted, MSS does not retain the values received from

the DHCP server. However, if the IP interface goes down but MSS is still running, MSS

attempts to reuse the address when the interface comes back up.

Conﬁguring the DHCP Client

To conﬁgure the DHCP client on a VLAN, use the following command:

set

interface

vlan-id

dhcp-client

{

enable

disable

}

The

vlan-id

can be the VLAN name or number.

The following command enables the DHCP client on VLAN

corpvlan

DWS-1008#

set interface corpvlan ip dhcp-client enable

success: change accepted.

You can conﬁgure the DHCP client on more than one VLAN, but the client can be active on

only one VLAN.

To remove all IP information from a VLAN, including the DHCP client and user-conﬁgured

DHCP server, use the following command:

clear

interface

vlan-id

Содержание DWS-1008







































































































































































































































































































































































































































































Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды

D-Link DWS-1008, Руководство пользователя

Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды