D-Link DWS-1008 Скачать руководство пользователя страница 449

Страница: 449 / 454

444

DWS-1008 User’s Manual

D-Link Systems, Inc.

Warranty

Appendix F - Warranty

Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides

this Limited warranty for its product only to the person or entity that originally purchased the

product from:

• D-Link or its authorized reseller or distributor and

• Products purchased and delivered within the ﬁfty states of the United States, the

District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations,

addresses with an APO or FPO.

Limited Warranty:

D-Link warrants that the hardware portion of the D-Link products described below will be free

from material defects in workmanship and materials from the date of original retail purchase of

the product, for the period set forth below applicable to the product type (“Warranty Period”),

except as otherwise stated herein.

1-Year Limited Warranty for the Product(s) is deﬁned as follows:

• Hardware (excluding power supplies and fans) One (1) Year

• Power Supplies and Fans One (1) Year

• Spare parts and spare kits Ninety (90) days

D-Link’s sole obligation shall be to repair or replace the defective Hardware during the

Warranty Period at no charge to the original owner or to refund at D-Link’s sole discretion.

Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service

Ofﬁce. The replacement Hardware need not be new or have an identical make, model or

part. D-Link may in its sole discretion replace the defective Hardware (or any part thereof)

with any reconditioned product that D-Link reasonably determines is substantially equivalent

(or superior) in all material respects to the defective Hardware. Repaired or replacement

Hardware will be warranted for the remainder of the original Warranty Period from the date of

original retail purchase. If a material defect is incapable of correction, or if D-Link determines

in its sole discretion that it is not practical to repair or replace the defective Hardware, the

price paid by the original purchaser for the defective Hardware will be refunded by D-Link

upon return to D-Link of the defective Hardware. All Hardware (or part thereof) that is replaced

by D-Link, or for which the purchase price is refunded, shall become the property of D-Link

upon replacement or refund.

Limited Software Warranty:

D-Link warrants that the software portion of the product (“Software”) will substantially conform

to D-Link’s then current functional speciﬁcations for the Software, as set forth in the applicable

documentation, from the date of original retail purchase of the Software for a period of ninety

(90) days (“Warranty Period”), provided that the Software is properly installed on approved

hardware and operated as contemplated in its documentation. D-Link further warrants that,

during the Warranty Period, the magnetic media on which D-Link delivers the Software will

be free of physical defects. D-Link’s sole obligation shall be to replace the non-conforming

Software (or defective media) with software that substantially conforms to D-Link’s functional

speciﬁcations for the Software or to refund at D-Link’s sole discretion.

Содержание DWS-1008







































































































































































































































































































































































































































































Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды

D-Link DWS-1008, Руководство пользователя

Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды