D-Link DWS-1008 Скачать руководство пользователя страница 452

Страница: 452 / 454

447

DWS-1008 User’s Manual

D-Link Systems, Inc.

Limitation of Liability:

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY

CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE

THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES

OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL

(INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF

REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION,

FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S

PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN,

STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR

WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO

WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY,

EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE

SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR,

REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.

THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE

PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING

EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU

OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.

Governing Law:

This Limited Warranty shall be governed by the laws of the State of California. Some states

do not allow exclusion or limitation of incidental or consequential damages, or limitations on

how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply.

This limited warranty provides speciﬁc legal rights and the product owner may also have

other rights which vary from state to state.

Trademarks:

D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered

trademarks are the property of their respective manufacturers or owners.

Copyright Statement:

No part of this publication or documentation accompanying this Product may be reproduced in

any form or by any means or used to make any derivative such as translation, transformation,

or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated

by the United States Copyright Act of 1976. Contents are subject to change without prior

CE Mark Warning:

This is a Class B product. In a domestic environment, this product

may cause radio interference, in which case the user may be required to take adequate

measures.

Appendix F - Warranty

Содержание DWS-1008







































































































































































































































































































































































































































































Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды

D-Link DWS-1008, Руководство пользователя

Результаты поиска

Содержание DWS-1008

Отзывы:

Похожие инструкции для DWS-1008

Бренды по названию

Популярные бренды