CTC Union GSW-3208M1, Руководство пользователя

Страница: 96 / 240

93
untagged.
-
untag_pvid
: this is a hybrid egress port. All egress packets except the
configured PVID will be tagged.
35
voice-vlan
command
This command is used to configure Voice VLAN function for the interface
port(s).
(config-if)# voice-vlan ?
discovery-protocol Set the Voice VLAN port discovery protocol mode
port-mode Set the Voice VLAN port mode
security Set the Voice VLAN port security mode
voice-vlan discovery-protocol [both | lldp | oui]
command is used to set the
Voice VLAN port discovery protocol. It will only work when auto detect mode is
enabled. We should enable LLDP feature before configuring discovery
protocol to "LLDP" or "Both". Changing the discovery protocol to "OUI" or
"LLDP" will restart auto detect process.
Possible discovery protocols are:
-
oui
: Detect telephony device by OUI address.
-
lldp
: Detect telephony device by LLDP.
-
both
: Both OUI and LLDP..
voice-vlan port-mode [auto | disable | force]
command is used to set Voice
VLAN operation mode on the ports.
-
auto
: Enable auto detect mode. It detects whether there is VoIP phone
attached to the specific port and configures the Voice VLAN members
automatically.
-
disable
: Disjoin from Voice VLAN.
-
force
: Force join to Voice VLAN.
voice-vlan security
command is used to enable security function on the
ports. When the security function is enabled, all non-telephonic MAC
addresses in the Voice VLAN will be blocked for 10 seconds. “
no voice-vlan
security
“ command is used to disable it.
6.2.4.2 Interface Configuring Commands for VLAN
Commands in Configuring Mode are for general switch settings. And its
prompt is “(config)#”.
If the characteristics are for VLAN group, it is done with “
interface vlan x
”
command in configure mode. For example, “interface vlan 100” is for
characteristics settings on VLAN 100.