CTC Union GSW-3208M1, Руководство пользователя

Страница: 56 / 240

53
Classification settings. It takes effect for those trusted DSCP val ues.
qos dscp translation x y
command is used to set global ingress DSCP
translation table. “
x
” is the DSCP value 0~63 before translation. “
y
” is the
DSCP value 0~63 after translation. Ingress side DSCP can be first
translated to new DSCP before using the DSCP for QoS class and DPL
map.
qos dscp trust x
command is used to set whether a specific DSCP value is
trusted. “
x
” is the dscp value 0~63. It is used to control whether a
specific DSCP value is trusted. Only frames with trusted DSCP values are
mapped to a specific QoS class and Drop Precedence Level. Frames with
untrusted DSCP values are treated as a non -IP frame.
Entering “qos qcl ?”, the following sub-commands will be shown.
(config)# qos qcl ?
<1-256> QCE ID
Entering “qos qcl x”, the prompt will become “
(config-QCE-x)#
” for further
Queue Control Entry configuration. “
x
” is the index of this QCE with number
1~256. For example, enter “qos qcl 10”.
(config)# qos qcl 10
(config-QCE-10)#
And ...
(config-QCE-10)# ?
exit Exit from current mode
help Show available commands
history Show a list of previously run commands
logout Disconnect
quit Quit commands
action Action Parameters
ethernet Port Members
key Key Parameters
next_id Next QCE ID
1.
exit
command
This command is used to leave current operation mode. Go back to
last mode.
2.
help
command
This command is used to show all the availab le commands in this
mode.
3.
history
command
This command is used to show the history of entering commands.