CTC Union GSW-3208M1, Руководство пользователя

Страница: 24 / 240

21
Enter “ping ?” at the prompt, the command syntax will be shown.
# ping ?
Syntax: ping [-n count] [-l length] [-i ping interval] ip
-n count : Number of echo requests to send.(1~60)
-l length : Send buffer size, and length (2-1452)
-i : ping interval (0-30)
ip : IP address (xxx.xxx.xxx.xxx)
For example, “ping 192.168.1.80”.
6.
ping6
command
User can use this command to ping another network device to verify the
network connection and activity with IPv6 address.
Enter “ping6 ?” at the prompt, the command syntax will be shown.
# ping6 ?
Syntax: ping6 [-n count] [-l length] [-i ping interval] ip
-n count : Number of echo requests to send.(1~60)
-l length : Send buffer size, and length (2-1452)
-i : ping interval (0-30)
ip : IPV6 address For example,fc80::215:c5ff:fe03:4dc7
7.
quit
command
This command is used to quit the console interface.
8.
reload
command
This command is used to reset switch. It will halt and perform a warm
restart.
Enter “reload” at the prompt, the switch will do warm restart in a fews
seconds.
# reload
System w ill reboot in a few seconds
9.
show
command
This command is used to show current system information and system
configuration.
Enter “show ?” at the prompt, the sub-command list will be shown.
# show ?
aaa Show AAA service configuration
acl Packet Access Control List
calendar Date and time information