CTC Union GSW-3208M1, Руководство пользователя

Страница: 18 / 240

15
6.2 Settings with Console Connection
6.2.1 Basic of the Console Interface
<< Enter Console Interface >>
Please follow the steps to complete the console hardware connec tion first.
1. Connect from console port of the switch to COM port of PC with the console
cable.
2. Start the terminal program of Windows. Create a new connection and
select COM port of PC used for the console. Set the configuration of the
terminal as
[115200,8,N,1]
. (You can find the terminal program in [Start] ->
[Programs] -> [Accessory Programs] -> [Communication] -> [Terminal]. If
you cannot find it, please install it from your Windows Installation Disk.
Please refer to your Windows user manual for th e installation.)
3. Power on the switch.
If everything is correct, the booting screen will appear in the terminal program
when the switch is powered on. It will stop at the following screen after some
initializing messages.
-------------------------------------------------------------------------------------------------------
................................................................................
................................................................................
Softw are Version: 10-P Ver:1.00.00
MAC Address : 00-00-00-11-22-33
Number of Ports : 10
Username:
-------------------------------------------------------------------------------------------------------
<< Previlege Levels for Users >>
There are three previlege levels for users of the switch - administrator, operator,
and guest, with previlege level 3, 2, 1. Use “
username
” command in system
configure mode under prompt “(config)#” to create users. The system default
user is “admin” with password “admin” and previlege level 3.
[ administrator level ]
The default user name and password is "
admin
" / ”
admin
”. And users with