CTC Union GSW-3208M1, Руководство пользователя

Страница: 57 / 240

54
4.
logout
command
This command is used to logout from console interface.
5.
quit
command
This command is used to quit from console interface. It has the
same function as logout.
6.
action
command
This command is used to define the QoS action for a frame when this
QCE is matched.
(config-QCE-10)# action ?
class QoS class
dpl DP Level
dscp DSCP
action class x
command is used to define the QoS class for the action.
“
x
” is the QoS class between 0~7.
action dpl x
command is used to define the Drop Precedence Level for the
action.
“
x
” is the Drop Precedence Level with value 0~1.
action dscp x
command is used to define the DSCP value for the action.
“
x
” is the DSCP value between 0~63.
7.
ethernet
command
This command is used to assign ports to this QCL Entry.
Its format is ...
(config-QCE-10)# ethernet ?
<1-10> Unit number: format 1/x 1/x,y,z 1/x-y 1/x-y,z
8.
key
command
This command is used to define the key parameters for this QCL Entry.
The key parameter is the L2 to L4 information of a frame.
(config-QCE-10)# key ?
dmac-type Destination MAC type
frame-type Frame Type
smac Source MAC address
tag Value of Tag field
key dmac-type [any | bc | mc | uc]
command is used to define the key
parameters by destination Mac address type of frames. It could be
any(don’t care), bc(Broadcast), mc(Multicast), and uc(Unicast) frame.
key frame-type [any | ethernet | ipv4 | ipv6 | llc | snap]
command is used to
define the key parameters by information in frame type of frames.
It could be ...
-
any (don’t care)
-
Ethernet Type (any / specific type)