CTC Union GSW-3208M1, Руководство пользователя

Страница: 132 / 240

129
# show sflow statistics samplers
Per-Port Statistics:
====================
No non-zero counters.
26.
show snmp
command
This command is used to show SNMP configuration of the switch.
# show snmp ?
access SNMPv3 access entry
community SNMPv3 community entry
group SNMPv3 group entry
user SNMPv3 user entry
view SNMPv3 view entry
<cr>
show snmp
command will show SNMP configuration of the switch.
# show snmp
SNMP Configuration:
===================
SNMP Mode : Enabled
SNMP Version : 2c
Read Community : public
Write Community : private
Trap Mode : Disabled
Trap Version : 1
Trap Community : public
Trap Destination : 192.168.1.10
Trap IPv6 Destination : ::
Trap Authentication Failure : Disabled
Trap Link-up and Link-dow n : Enabled
Trap Inform Mode : Enabled
Trap Inform Timeout (seconds) : 1
Trap Inform Retry Times : 5
Trap Probe Security Engine ID : Enabled
Trap Security Engine ID :
Trap Security Name : None
SNMPv3 Engine ID : 800007e5017f000001
show snmp access
command will show SNMPv3 access entry.
# show snmp access
SNMPv3 Accesses Table:
Idx Group Name Model Level ReadView WriteView
--- -------------------------------- ----- --------------------- ---------------- -------------