CTC Union GSW-3208M1, Руководство пользователя

Страница: 71 / 240

68
subintervals of equal length. If a reply is not received within the subinterval,
the request is transmitted again. This algorithm causes the RADIUS server to
be queried up to 3 times before it is considered to be dead.
39
username
command
This command is used to create a user and assign username, password,
and privilege_level for him/her.
username xxx yyy z
command is used to create a user and assign
username, password, and privilege_level. “
xxx
” is the username. The
allowed string length is 1 to 31. The valid user name is a combination of
letters, numbers and underscores. “
yyy
” is the password. The allowed
string length is 0 to 31. “
z
” is the privilege_level. The allowed range is
1~3.
There are three previlege levels for users of the switch - administrator,
operator, and guest, with previlege level 3, 2, 1. With administrator level, it is
allowed to fully management the switch. With operator level, it is allowed to
view the switch status and configuration, and run some system maintenance
commands. With guest level, it is allowed to view the switch status and
configuration only. No setup/configure commands are supported.
40
vlan
command
This command is used to enter VLAN configuring mode. And the prompt will
become ...
(config)# vlan database
(config-vlan)#
The operations for VLAN are configured in VLAN configuring mode. Please
refer to
6.2.5 VLAN Configuring Commands
section for the details.
41
voice-vlan
command
This command is used to configure Voice VLAN function. Voice VLAN
function can detect IP Phone traffic and assign the traffic to a VLAN with
configurable traffic priority automatically.
Enter “voice-vlan ?”, the sub-commands will be shown.
(config)# voice-vlan ?
agetime Indicates the Voice VLAN secure learning aging time
oui Specify hold time multiplier
traffic-class Indicates the Voice VLAN traffic class
vlan-id Indicates the Voice VLAN ID