CTC Union GSW-3208M1, Руководство пользователя

Страница: 20 / 240

17
switch can be configured in this mode.
----------------------------------------------------------------
(config)# interface vlan 10
(config-if)#
----------------------------------------------------------------
[ operator level ]
Users with operator level could be created by administrator with “username”
command under “(config)#”. The previlege level is “2” for them.
After login the switch, a prompt “
>
” will be shown. Because this switch
supports command-line for
console interface, you can press “
?
” to check the
command list.
With “
?
” command, you can find the command list as follow.
---------------------------------------------------------------------------------------------
> ?
exit Exit from current mode
help Show available commands
history Show a list of previously run commands
logout Disconnect
ping Ping IPv4 address (ICMPv4 echo) packets to other netw ork nodes
ping6 Ping IPv6 address (ICMPv6 echo) packets to other netw ork nodes
quit Quit commands
reload Halts and performs a w arm restart
show Show s information
copy Copies from one file to another
>
---------------------------------------------------------------------------------------------
These are the basic system commands for the switch.
With operator level, it is allowed to view the switch status and configuration, and
run some system maintenance commands.
[ guest level ]
Users with guest level could be created by administrator with “username”
command under “(config)#”. The previlege level is “1” for them.
After login the switch, a prompt “
>
” will be shown. With “
?
” command, you can
find the command list as follow.
---------------------------------------------------------------------------------------------
> ?