CTC Union GSW-3208M1, Руководство пользователя

Страница: 81 / 240

78
12
end
command
This command is used to exit from interface mode.
(config-if)# end
(config)#
13
excessive
command
This command is used to configure the operation when excessive collision
happens on half duplex mode.
excessive [discard | restart]
command is used to configure the operation
when excessive collision happens on half duplex mo de.
-
discard
: discard frame after 16 collisions
-
restart
: restart backoff algorithm after 16 collisions
14
flowcontrol
command
This command is used to enable flow control function of the interface port(s).
flowcontrol
command is used to enable flow control function of the interface
port(s).
no flowcontrol
command is used to disable flow control function of the
interface port(s).
15
interface
command
This command is used to change the interface port(s) for next setup
commands.
(config-if)# interface ?
ethernet Ethernet port
(config-if)# interface ethernet ?
<1-10> Unit number: format 1/x 1/x,y,z 1/x-y 1/x-y,z
For example,
“(config)# interface ethernet 1/5” will set current setup interface to Port 5 and
all the commands will be applied to Port 5.
“(config-if)# interface ethernet 1/6-7” will change current setup interface to Port
6-7 and all the commands will be applied to Port 6 -7.
The description of commands in interface configuring mode is put in Section
6.2.4 Interface Configuring Commands
. Please refer to the section for the
details.