CTC Union GSW-3208M1, Руководство пользователя

Страница: 50 / 240

47
(config)# management 1 ?
ipaddr Set IP and net mask for a specified set
protocol Set protocol for a specified set
management enable
command is used to enable the management security
function. And “
no management enable
“ command is used to disable it.
management x ipaddr y.y.y.y z.z.z.z
command is used to set the IP address
range allowed
for this rule. “
x
” is the index of the rule.
y.y.y.y
is the start IP
address.
z.z.z.z
is the end IP address. Users in this IP address range will
follow this rule for switch management.
management x protocol [http/https | snmp | telnet/ssh]
command is used to
enable the remote management network protocol for this rule. “
x
” is the
index of the rule.
Use “
management x ipaddr y.y.y.y z.z.z.z
” command to create a rule first.
Then use “
management x protocol y
” command to assign allowed network
protocol for the rule.
no management x
command is used to delete a rule that is indexed with “
x
”.
25
mirror
command
This command is used to enable mirror function of the switch. And
no
mirror
command can be used to disable mirror function of the switch.
26
mvr
command
This command is used to configure MVR (Multicast VLAN Registration)
function. VLAN function will isolate traffic between VLAN groups. But it will
also isolate IP multicast traffic for subscribers in different VLANs. The MVR
function allows one multicast VLAN to be shared by subscribers in different
VLANs. That can reduce the multicast traffic for VLANs. The MVR feature
enables multicast traffic forwarding on the Multicast VLANs. In a multicast
television application, a PC or a network television or a set-top box can receive
the multicast stream. Multiple set-top boxes or PCs can be connected to one
subscriber port, which is a switch port configured as an MVR receiver port.
When a subscriber selects a channel, the set-top box or PC sends an
IGMP/MLD report message to Switch A to join the appropriate multicast group
address. Uplink ports that send and receive multicast data to and from the
multicast VLAN are called MVR source ports.
It is allowed to create at maximum 8 MVR VLANs with corresponding c hannel
settings for each Multicast VLAN. There will be totally at maximum 256 group
addresses for channel settings.