CTC Union GSW-3208M1, Руководство пользователя

Страница: 87 / 240

84
port Configures the characteristics of the port
port-vlan Configures Port-Based VLAN
pow er-control Decrease energy consumption
qos Configuration of QoS
sflow configured sFlow samplers
shutdow n Shuts dow n the selected interface
spanning-tree Specifies spanning tree configuration
speed Configures speed operation
sw itchport Configures sw itching mode characteristics
voice-vlan Voice VLAN Configuration
For example,
“
lacp mode
” command can enable the LACP function on the interface port(s)
and “
no lacp mode
” command can disable it.
“
maximum-packet-length 2000
” will set the maximum packet size to 2000,
and “
no maximum-packet-length
” will put it to factory default setting 9600.
26
port
command
This command is used to setup monitor function and security function on the
interface port(s).
(config-if)# port ?
monitor Monitors another interface
security Specifies port security
port monitor ethernet 1/x [disabled | enabled | rx | tx]
command is used to
add Port x to the monitored port list. And “
no port monitor ethernet 1/x
”
command will remove Port x from monitored port list. “
x
” is the monitored port
number with format format 1/x, 1/x,y,z, 1/x-y, 1/x-y,z.
-
disabled
: Neither frames transmitted nor frames received are mirrored.
-
enabled
: Frames received and frames transmitted are mirrored on the
mirror port.
-
rx
: Frames received on this port are mirrored on the mirror port. Fra mes
transmitted are not mirrored.
-
tx
: Frames transmitted on this port are mirrored on the mirror port. Frames
received are not mirrored.
port security action [none | shut | trap | trap_shut]
command is used to set
the action to take when port security is violated.
-
none
: If Limit is reached, no further action.
-
shut
: If Limit is reached, shut down the port.
-
trap
: If Limit is reached, send an SNMP trap.
-
trap_shut
: If Limit is reached, send an SNMP trap & shut down the port.
port security max-mac-count x
command is used to set the maximum
number of MAC addresses that can be secured on this port. “
x
” is the