CTC Union GSW-3208M1, Руководство пользователя

Страница: 62 / 240

59
community Specify the community w hen trap is sent
desc Indicates this event, the string length is from 0 to 127
type Indicates the notification of the event
rmon event x community yyy
command is used to specify the community
when trap is sent.
“
x
” is the index of the entry between 1~65535. “
yyy
” is
the community string with length 0~127.
rmon event x desc yyy
command is used to i
ndicates this event.
“
x
” is the
index
of the entry between 1~65535. “
yyy
” is a string with length 0~127.
rmon event x type [log | log-trap | none | trap]
command is used to
indicates the notification of the event.
“
x
” is the index of the entry between
1~65535. The possible notification are ...
-
log
: The number of uni-cast packets delivered to a higher-layer protocol.
-
log-trap
: The number of inbound packets that are discarded even the
packets are normal.
-
none
: The total number of octets received on the interface, including
framing characters.
-
trap
: The number of broad-cast and multi-cast packets delivered to a
higher-layer protocol.
Enter “rmon history x ?”. The commands for configiring parameters for the
history will be shown. “x” is the index of the entry. The range is from 1 to
65535.
For example, entering “rmon history 10 ?”, the follwing sub -
commands will be shown.
(config)# rmon history 10 ?
buckets Indicates the maximum data entries associated this History control
entry stored in RMON
data_source Indicates the port ID w hich w ants to be monitored
interval Indicates the interval in seconds for sampling the history statistics data
rmon history x buckets y
command is used to indicates the maximum
data entries associated this History control entry stored in RMON.
“
x
” is
the index
of the entry between 1~65535. “
y
” is the maximum data entries
associated this History control entry stored in RMON. The range is from 1 to
3600.
rmon history x data_source .1.3.6.1.2.1.2.2.1.1.y
command is used to
Indicates the port ID which wants to be monitored.
“
x
” is the index of the
entry between 1~65535. “
y
” is the port ID which wants to be monitored.
rmon history x interval y
command is used to indicates the interval in
seconds for sampling the history statistics data.
“
x
” is the index of the
entry between 1~65535. “
y
” is the interval in seconds for sampling the
history statistics data. The range is from 1 to 3600.
Enter “rmon statistics x ?”. The commands for configiring parameters for the
statistics will be shown. “x” is the index of the entry. The range is from 1 to