CTC Union GSW-3208M1, Руководство пользователя

Страница: 31 / 240

28
number between 1~256. That is the index of this ACE.
This command will change the prompt to “
(config-ace-x)#
” for ACL setting of
this filtering rule. “
x
” is the index number of this rule.
After ACL rules are defined, apply ACL rules to connection ports with “acl”
command in port interface configuring mode under prompt “(config -if)#” next.
acl delete x
command can delete a Access Control Entry (ACE). “
x
” is a
number between 1~256. That is the index of this ACE.
acl rate-limiter x unit kbps rate y
acl rate-limiter x unit pps rate y
command can define a rate limiter. Its unit
could be by kbps(kilo bit per second) or pps(packet per second). “
x
” is a
index number between 1~16 for this rate-
limiter. “
y
” is the rate limit number
between 0-3276700 for unit pps, or 0, 100, 200, 300, ..., 1000000 for unit
kbps.
A rate-limiter can be applied to ACE or port by its index number.
----------------------------------------------
Next, these are the commands for “
acl add x
” command to define a ACL rule -
Access Control Entry (ACE). The prompt is “
(config-ace-x)#
”
Enter “?” at the prompt “
(config-ace-x)#
”, the commands will be shown.
For example,
(config)# acl add 10
(config-ace-10)# ?
exit Exit from current mode
help Show available commands
history Show a list of previously run commands
logout Disconnect
quit Quit commands
action Specify frames action
destination-mac Specify destination mac address
frame-type Select the frame type for this ACE
logging Specify the logging operation of the ACE
mirror Specify the mirror operation of the ACE
next_id Next ACE ID (1-256)
policy Policy ACE keyword
port Port list
port-redirect port copy
rate-limiter Specify rule's rate
shutdown Specify the shut do wn operation of the ACE
source-mac Specify source mac address
tagged Specify tagged/untagged frames tagged