CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию

Страница: 89 / 116

89
CTC EcoZenith i350
11.15 Pool (accessory)
Pool temp ºC 22 (5 to 58)
The pool temperature is set in this menu.
Pool diff ºC 1.0 (0.2 to 5.0)
The permitted difference between the start and stop
temperature in the pool is specified here.
Max time Pool (min) 20(10 to 150)
When there is a need for pool heating and heating/hot
water, the maximum time for pool heating is shown
here.
Charge pump % 50 (0 to 100)
The charge pump speed is set here.
Smart low price ºC 1 (Off, 1 to 5)
Find out more in section “Smart Grid”.
Smart overcapacity ºC 2 (Off, 1 to 5)
Find out more in section “Smart Grid”.
Min RPS (EcoAir 500M only) 50 (50 to 100)
Minimum compressor speed during pool heating. When
the heat pump switches from heating to pool, this RPS
is used for pool heating. When the need for energy is
low, e.g. during the summer, the power for pool heating
can be increased here.
Pool
Pool temp °C 22
Pool diff °C 1.0
Max time Pool 20
Charge pump % 50
Smart low price ºC 1
Smart overcapacity ºC 2
Min RPS 50
11.16 External heat source
(EHS)
Charge start °C 70
This is the minimum temperature required in the external
heat source tank (B47) for the mixing valve to open and
emit heat to the system.
Stop diff (°C) 5
Temperature difference before charging to the extra
heat source stops.
Smart block cap. Off (On/Off)
Electric operation prioritised. The shunt on the EHS tank
is closed to accumulate heat energy.
Find out more in section “Smart Grid”.
External heat source
Charge start ºC 70
Stop diff. 5
Smart block cap. Off