CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию

Страница: 97 / 116

97 CTC EcoZenith i350
Procedure:
First of all, Smart A and Smart B are assigned a separate input in the
Advanced/Define/Define Remote Control menu.
Activation then takes place based on the terminal blocks' closure and
settings for each function.
• Normal price: (Smart A: Open, Smart B: Open).
No effect on the system.
• Low price mode: (Smart A: Open, Smart B: Closed).
• Overcapacity mode: (Smart A:Closed, Smart B:Closed).
• Blocking mode: (Smart A:Closed, Smart B:Open)
• In each function that can be controlled there is a choice of temperature
change for low price mode and overcapacity mode.
Example: factory-set low price 1°C increase* in temperature.
Example: factory-set overcapacity 2°C increase* in temperature.
The following can be controlled:
• Room temperature i heating systems 1–2
• Primary flow temperature in heating systems 1–2
• DHW tank
• Pool
• Cooling
• EHS
Comment re cooling
When active cooling = setpoint has not been reached.
E.g. 26,0 (25.0)
In these cases Smart Grid "Normal mode" is activated for the heating
systems. (Smart low price or smart overcapacity is not activated).
The reason for this is to avoid a conflict between heating and cooling. For
example, if there is a standard 2 ºC difference between heating and cooling,
you do not want to heat and cool at the same time.
Smart low price ºC 1 (Off, 1-5 )
Smart overcap. ºC 2 (Off, 1-5 )
*DHW tank has setting range 1–30