CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию

Страница: 92 / 116

92 CTC EcoZenith i350
11.18.1 Defi ne SMS (accessory)
This is for defining whether SMS control is installed
(accessory).
Activate Yes (Yes/No)
If “Yes”, the menus below will be displayed.
Level of signal
The signal strength of the reception is shown here.
Phone Number 1
The first activated phone number is shown here.
Phone Number 2
The second activated phone number is shown here.
Hardware Version
The hardware version of the SMS accessory is shown
here.
Software version
The software version of the SMS accessory is shown
here.
NB: For more information on the SMS function, see the
“CTC SMS” manual.
11.18.2 Defi ne cooling (accessory)
The cooling function is adjusted using primary flow
sensor 2 (B2), which means that heating circuit 2 and
cooling cannot be used simultaneously.
Cooling No (No/Yes)
This is for selecting whether cooling is installed.
See the CTC EcoComfort manual for more
information.
11.18.3 Def. Solar panels
(accessory)
Solar panels used No (No/Yes)
Specify here whether solar panels are used.
Recharge bedrock No (No/Yes)
Specify here whether recharging to bedrock (bore hole)
or ground coil is installed (only possible for ground
source heat pumps).
Alternate charging No (No/Yes)
This function activates system 3.
The function lets you choose to prioritise charging of the
external heat source (EHS) or X-volume.
EcoTank No (No/Yes)
This function activates system 2 with EcoTank buffer
tank (or equivalent).
Panel connected to exchanger (coil/exchanger)
Specify here whether there is a solar coil in the EcoTank
or an intermediate exchanger is installed.
Dansk Nederlands Čeština
Eesti Polski Slovenščina
Svenska Norsk English
Deutsch Suomi Française
Def CTC SMS
Activate Yes
Level of signal
Phone Number 1
+46712345678
Phone Number 2 -----------------
Hardware Version 1 1
Software Version 1 9
Settings language
Settings language
Def. Solpaneler
Solar panels used Yes
Recharge bedrock Yes
Alternate charging No
EcoTank No
Panel connected to
Exchanger