CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию

Страница: 78 / 116

78 CTC EcoZenith i350
Dansk Nederlands Čeština
Eesti Polski Slovenščina
Svenska Norsk English
Deutsch Suomi Française
Heat pump
Settings language
Compressor: Permitted
1 Stop at outdoorºC -22
2
Brine pump on Auto
Tariff HP Off
Smart block HP Off
Start at degree minute -60
HS<->DHW time (sec) 120
Max RPS 90
Settings language
Compressor Permitted/Blocked
The product is supplied with the compressor set to
blocked, since the heat pump is connected. Since the
compressor in the heat pump is blocked, the product
operates like an electric boiler with full functionality.
Permitted means that the compressor is allowed to
operate.
Stop at outdoor temp °C -22 (-22 to 10)
This menu is displayed only if the heat pump is
an EcoAir model, and is used to set the outdoor
temperature at which the compressor is no longer
permitted to operate.
EcoAir 400
EcoAir 500M
Brine pump on Auto/10d/On
After installation is complete, you can choose:
• to run the brine pump (G20) constantly for 10 days
to remove air from the system. The pump then
returns to auto mode.
• On means that the brine pump (G20) will operate
continuously.
•
Auto means that the brine pump (G20) will operate
at the same time as the compressor.
EcoPart 400
Tariff HP Off(On/Off)
Find out more in the section entitled “Smart Grid”.
Smart blocking HP Off(On/Off)
Find out more in the section entitled “Smart Grid”.
Start at degree minute -60 (-900 to -30)
This states the degree minute at which the heat pump
will start.
HS<->DHW time (sec) 120 (30 to 240)
Time in seconds for which the compressor maintains
a constant speed while switching between HS and
DHW.
11.8 Heat pump
HS<->DHW time (sec) 120
Max RPS 90
>>