CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию

Страница: 87 / 116

87
CTC EcoZenith i350
11.13.5 Settings X-volume
Settings applicable when X-volume is activated.
This is also called system 3.
Charge temperature °C 60 (10 to 95)
The maximum permitted temperature is set in the
X-volume. Charging stops once the set temperature has
been reached.
Maximum tank temp °C 70 (60 to 125)
If the solar panel temperature exceeds its maximum
set temperature, energy is permitted to continue to be
transferred to the tank up to this set tank temperature.
Check that the protection function “Over temp
protection panel” is activated.
11.13.6 Recharging of bedrock
settings
Recharging active No (No/Yes)
The “recharging of bore hole” function is activated here.
The function is designed to protect the solar panel
against over temperatures, but it can also charge the
bore hole with energy.
-Charge start diff temp, °C 60 (3 to 120)
Here you can set the temperature difference at which
charging of the bore hole should start. The solar panel
must be this many degrees warmer than the brine in the
bore hole for charging to start. If the panel is charging or
can charge the tank, tank charging is prioritised.
-Charge stop diff temp °C 30 (1 to 118)
Here you can set the temperature difference at which
charging of the bore hole should stop. When the
temperature difference between the solar panel and the
brine falls below this set value, the charging stops.
-Max brine temp °C 18 (1 to 30)
Setting for the maximum permitted brine temperature.
Charging of the bore hole ceases when this value has
been reached.
X-volume
Charge temperature °C 60
Maximum tank temp °C 70
Recharging active No
-Charge start diff temp °C 60
-Charge stop diff temp °C 30
-Max brine temperature °C 18
Recharging of bedrock