CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию

Страница: 80 / 116

80 CTC EcoZenith i350
11.9 Electric heater
Max el. heater kW 9.0 (0 to 11.9)
Maximum permitted output from electric immersion
heater.
Max el. heater DHW kW 0.0 (0 to 11.9)
Maximum permitted output from the immersion heater
when charging hot water. Can be set to the available
power settings for the model.
Start at degree minute -500 (-900 to -30)
This states at which degree minute the electric
immersion heater will start.
Diff step, degree minute -50 (-20 to -300)
This states the difference in degree minutes between
the increments of output for the immersion heater. The
output of the immersion heater is Max el. heater kW
divided into 10 increments.
Main fuse A 20 (10 to 90)
The property’s main fuse size is set here. This setting
and the fitted current sensors ensure the fuses are
protected when using appliances which generate
temporary power peaks, for example, cookers, ovens,
engine heaters, etc. The product temporarily reduces
power drawn where this type of equipment is being
used.
Conv. factor curr. sensors 1 (1 to 10)
This menu contains the factor the current sensor is to
use. This setting is only performed if the connection has
been installed for a current sensor for higher currents.
Tariff, el. Off (On/Off)
Find out more in the section entitled “Smart Grid”.
Smart block immersion Off (On/Off)
Find out more in the section entitled “Smart Grid”.
Dansk Nederlands Čeština
Eesti Polski Slovenščina
Svenska Norsk English
Deutsch Suomi Française
Electric heater
Max el. heater kW 9.0
Max el. heater DHW kW 0.0
Start at degree minute -500
Diff step, degree minute -50
Main fuse A 20
Conv. factor curr. sensors 1
Tariff EL Off
Smart block immersion Off
Settings language
Settings language