CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию

Страница: 45 / 116

45 CTC EcoZenith i350
Position for antifreeze setting
i
The selected power
output must be
written on the rating
plate with a marker.
i
Save these settings
under: Installer/
Settings/Save
settings
First start
Close the omnipolar switch for the product. The display will switch on. The
product will now ask the following:
1. Select the language and push OK.
2. Coni rm that the system is i lled with water and press OK.
3. Size of main fuse Choose between 10 and 90 A.
4. Enter the greatest immersion heater output (for operation as an electric
boiler only, this must be set sufi ciently high to cover the building’s energy
needs).
5. Select the option to permit the compressor if a heat pump is installed
and the collector system is ready. When the compressor is started for the
i rst time, a check is automatically carried out to ensure that it is running
in the correct direction.
6. Specify the max primary l ow °C for heating circuit 1.
7. Specify the inclination for heating circuit 1.
8. Specify the adjustment for heating circuit 1.
If the primary l ow sensor for heating circuit 2 is installed, repeat steps 7
to 9 for heating circuit 2.
9. A test sequence for the current sensor is carried out.
10. The tank then starts, the hot water pump’s bleeding programme is au-
tomatically activated for 1 h, and the start menu appears on the touch-
screen.
11. When operating as an electric boiler only, the settings must be changed.
• Settings/DHW tank/Add heat DHW – Yes.
• DHW – Select mode: Comfort