CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию, Страница: 70 / 116

70 CTC EcoZenith i350
11.6.4 Operation data heating
Primary flow °C
Shows the temperature supplied to the system’s
radiators, along with the temperature which the system
is trying to achieve. This value will vary during the
year according to the parameters set and the current
outdoor temperature.
Return flow °C (accessory)
If sensor B7 and pump G1 are installed and defined,
the temperature of the water returning from the heating
circuit to the heat pump is shown.
Radiator pump
Shows the operating status of the radiator pump.
Accessories:
Primary flow 2 °C
Shows the temperature supplied to heating circuit 2, if it
is installed.
Radiator pump 2
Shows the operating status of the radiator pump (G2).
Mixing valve 2
This indicates whether the mixing valve increases
(opens) or reduces (closes) the heat supplied to heating
circuit 2.
11.6.5 Stored oper data
This displays the heating circuit’s operation data for
the last 24 hours. The furthest point to the right is the
present, while the data for the last 24 hours is displayed
to the left. The time “rolls” forward.
Blue curves show the current outdoor temperature.
The green and pink curves show room temperatures 1
and 2 respectively.
The red curve shows the primary flow temperature.
The grey curve shows the primary flow temperature of
heating circuit 2 if it is installed.
The yellow curve shows the return temperature.
Operation data heating
T ºC
60
40
20
0
-20
16 20 0 4 8 12
Stored oper data
Out Room1 Prim1 Return Room2 Prim2
Primary flow 1 ºC 37 (38)
Return flow ºC 33
Radiator pump On
Primary flow 2ºC 37 (38)
Radiator pump 2 On
Mixing valve 2 Open
Operation data heating