CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию

Страница: 55 / 116

55 CTC EcoZenith i350
The circulation pumps in CTC’s products have energy efficiency class A.
Electrical data, 1 x 230 V, 50 Hz
≤
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Q [m³/h]
0
2
4
6
8
10
12
[m]
H
0
20
40
60
80
100
120
[kPa]
p
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Q [l/s]
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Q [m³/h]
0
40
80
120
160
[W]
P1
UPMXL GEO 25-125 130 PWM, 1 x 230 V, 50/60 Hz
≤
Electrical data, 1 x 230 V, 50 Hz
Dimensional sketches and control box positions
Speed
P
1
[W] I
1/1
[A]
Min. 3 0.06
Max. 180 1.4
≤
Driftinfo system
Driftinfo kompressor
Kompressor Till 65 rps
Laddpump Till 47%
Brinepump/Fläkt Till
VP in/ut °C
35.5 / 42.3
Ute 7.1
Timer avfrostning
25.1
Ström A 4.0
10.2 Pump curve for heating medium system
circulation pump
10.3 Flow check
Once the system has been in operation and stabilised and as the outdoor
temperature gets colder, the temperature differential between HPout and
HPin should be checked so that the set flow speed is sufficient:
For heat pump in product range:
• EcoAir 400, see table in installation instructions for heat pump.
• EcoAir 500M series:
floor heating: HPout–HPin should not exceed 5 degrees, as rps > 20
radiators: HPout–HPin should not exceed 10 degrees, as rps > 20
If HPout–HPin is greater, the circulation pump speed should be
increased.
With an outdoor temperature of -15°C, the temperature differential
should be around 5/10 degrees depending on the temperature
differential the system is designed for.
• EcoPart 400, see table in installation instructions for heat pump.
Electrical data
Speed