CTC Union EcoZenith i350 H, Руководство по установке и обслуживанию

Страница: 77 / 116

77
CTC EcoZenith i350
Drying period mode
Off (Off/1/2/3)
Floor drying function for newly-built properties.
The function limits the calculation of primary flow
temperature (setpoint) for “Your home’s heating
settings” to the schedule below.
Mode 1
Floor drying function for 8 days.
#1. The (setpoint) for the heating circuit is set to 25ºC
for 4 days.
#2. On Days 5–8, the value set in “ Drying period
temp ºC” is used.
From Day 9 onwards the value is calculated
automatically according to “Your home’s heating
settings”.
Mode 2
Floor drying function for 10 days + stepped increase
and decrease.
#1. Stepped increase start. The (setpoint) for the
heating circuit is set to 25ºC. The (setpoint) is then
raised by 5ºC each day until it is equal to the “ Drying
period temp ºC”.
The final step may be less than 5ºC.
#3. Stepped decrease. After the stepped increase
and 10 days at an even temperature, the temperature
(setpoint) is reduced to 25ºC in daily 5ºC stages.
The final step may be less than 5ºC.
Following the stepped decrease and one day at the
(setpoint) of 25ºC the value is calculated automatically
according to “Your home’s heating settings”.
Mode 3
This mode starts with Mode 1, followed by Mode 2
and finally by “Your home’s heating settings”.
Drying period temp ºC
25 (25 to 55)
Here you set the temperature for #2 as shown above.
Day
Day
1 2 3 4 5 6 7 8 9 etc...
ºC
Example of Mode 1 with “Floor function temp ºC” of
38ºC.
“Your home’s heating settings”
#1.
#2.
“Your home’s heating settings”
#1. #3. #2. 10 days
Example of Mode 2 with “Floor function temp ºC” of
37ºC.
Example of operation data for Mode 2, Day 1 of 12
with current setpoint (25) ºC.
30
20
1 2 3 4 5 6 7 8 9 10 11 12 13 etc...
30
20
ºC
40
40
58 ºC -5 ºC
Info golvtorkning estricht
Room temp. DHW Operation
Drying period active 1 / 12 (25)
CTC EcoZenith i350 Monday 09:35