Cleco 17BP, Инструкция по эксплуатации

Страница: 5 / 64

2278SHa_Tool_EN.fm, 25.08.2017
5
General safety instructions for
electric tools
Keep all directions and safety
instructions for future reference.
The term "electric tool" used in these safety instructions
refers to an electrically powered tool (with power cable) and
also to battery operated electric tools (without power
cables).
1 Safety at work
a) Keep your work area clean and well illuminated.
Untidiness and poorly illuminated work areas can cause
accidents.
b) Do not work with electric tools in an
explosive environment where there are
combustible fluids, gases or dust.
Elec-
tric tools create sparks which could ignite
the dust or the vapors.
c) Keep children and other persons away when using
electric tools.
If you are distracted, you could lose con-
trol over the tool.
2 Electrical safety
a) The plug on the electric tool must fit in the outlet.
The plug must not be modified in any way. Do not
use an adapter plug together with electric tools with
protective ground connection.
Unmodified plugs and
matching outlets reduce the risk of an electric shock.
b) Avoid physical contact with ground-protected sur-
faces such as pipes, heating, ovens and fridges.
The risk of an electric shock will be greater if your body
is connected to ground.
c) Keep electric tools away from rain and wetness.
Water ingress into an electric tool will increase the risk
of an electric shock.
d) Do not misuse the cable to carry or suspend the
electric tool or to pull the plug from the outlet. Keep
the cable away from heat, oil, sharp edges or mov-
ing parts of the machine.
Damaged or tangled cables
will increase the risk of an electric shock.
3 Safety of persons
Be alert, pay attention to what you are doing and act
sensibly when working with electric tools. Do not use
electric tools if you are tired or under the influence of
drugs, alcohol or medication.
One moment of careless-
ness when using an electric tool can lead to serious inju-
ries.
a)
Use personal protection equipment and
always wear protective goggles.
Depending on the type electric tool and on
how it is being used, using personal protec-
tion equipment such as a dust mask, non-
slip gloves, a hard hat or ear protectors will
reduce the risk of injuries.
b) Avoid unintentional start-ups. Make sure the elec-
tric tool is switched off before you connect it to the
power supply or the battery, pick it up or carry it.
Carrying an electric tool with your finger on the switch or
connecting the tool to the power supply while it is
switched on could cause an accident.
c) Remove any adjustment tools or wrenches before
switching the electric tool on.
A tool or wrench in a
turning part of the tool could cause injuries.
d) Avoid any abnormal posture. Make sure you are
standing firmly and keep your balance at all times.
This will enable you to keep better control over the elec-
tric tool in unexpected situations.
e) Wear suitable clothing. Do not wear
loose clothing or jewelery. Keep hair,
clothing and gloves away from moving
parts.
Loose clothing, jewelery or long hair
could get caught up in moving parts.
4 Use and handling of a electric tool
a) Do not overload the tool. Use the electric tool
appropriate to the job you are doing.
Your work will
be better and safer with the appropriate electric tool in
the specified power range.
b) Do not use an electric tool if the switch is defective.
An electric tool that cannot be switched on and off is
dangerous and must be repaired.
c) Pull the plug for the nutrunner controller
or the tool cable from the outlet and/or
remove the battery before making any
device settings, replacing accessories,
or putting the device away.
These pre-
cautionary measures will prevent the elec-
tric tool from starting unexpectedly.
d) Keep electric tools out of the reach of children
when they are not being used. Do not allow persons
to use the tool unless they are familiar with it and
have read these instructions.
Electric tools are dan-
gerous if they are used by unexperienced persons.
e) Take good care of electric tools. Check that moving
parts are working properly and not sticking, that no
parts are broken or damaged such that the function
of the electric tool is impaired. Have any damaged
WARNING!
Read all directions and safety instruc-
tions.
Failure to follow the directions and
safety instructions could result in electric
shocks, burns and/or serious injuries.
EN