Cleco 17BP, Инструкция по эксплуатации

Страница: 39 / 64

2291d-en_Wartung_bedingt.fm, 25.08.2017
P1890E/EN 2017-06 39
Servicing
9
9 Servicing
9.1 Cleaning instructions
For tools with a built-in barcode scanner, the window must be free of dirt. The barcode is not read if the win-
dow is dirty.

Clean it regularly—or immediately, if it becomes dirty—using a damp cloth and a conventional window
cleaner. Do not use acetone for cleaning.

Remove contamination on the plastic housing (47BA(…)L) with a commercially available cleaning agent.
Do not use acidic cleaners or acetone. These could dissolve the plastic.
9.2 Service schedule
A repair is only permitted by Apex Tool Group authorized personnel. Regular service reduces operating
faults, repair costs, and downtime. In addition to the following service schedule, implement a safety-related
service program that takes the local regulations for repair and service for all operating phases of the tool
into account.
CAUTION!
Risk of injury through unintentional activation
– prior to servicing 47BA disconnect power supply.
After
… fastening cycles
1)2)
)
1) For the number of fastening cycles, refer to the counter display in 8.3.4 Administration submenu, Page 28
2) Use of 80% of maximum torque
Measures
100,000

Check to ensure the battery adapter, scanner and wireless adapter are
seated securely.
 Check the tool and power supply for damage.

Check to ensure scanner window is transparent.
 Check to ensure the power supply is clean.
 Check to ensure battery charger is clean.
 Check the gearing and angle head for leaks.
500,000  Check power supply guide, locking mechanism and contacts for wear and
replace if necessary.
 Clean the gearing parts with a grease-dissolving agent and re-lubricate.
 Check the gearing parts for wear, renew as necessary.
1 million  Recommendation: Recalibration of tool, see 13.1 Rekalibrierung,
Page 67.
2.5 million  General refurbishment of tool. Send it to Sales & Service Centers .