Cleco 17BP, Инструкция по эксплуатации

Страница: 12 / 64

Product description
4
12 P1890E/EN 2017-06
2291b-en_1_3_bedingt.fm, 25.08.2017
4.2.1 Function keys
Left function key <F1>
• Confirm error message

Press once.
Programmable: Depending on how the key is programmed, actions can be carried out by pressing it briefly.
•
Exit menu

Press for two seconds
Right function key <F1>
• Activate menu

Press until the display shows the Main menu (for additional information, refer to 8.3.4 Administration
submenu, Page 28).
• Select functions, if menu is activated

Press for two seconds. Alternatively, the start button can be pressed.
4.2.2 LED display
The LED display shows the respective operating status and the result of the last fastening sequence (see
7.2 Operating status, Page 19):
Software update
During the software update , the actual programming process is indicated by rapid flashing alternating at
irregular intervals between red and green.
4.2.3 Start button
Depending on the setting, the start button has three functions:
•
It activates the LED lighting.

Press the start button halfway down and hold it.
• It starts the motor, the LED light goes out.

Press the start button all the way down.
• It activates the barcode scanner—only for types of the 17BP(...)S series.
LEDs Operating status Result
after fastening cycle
Continuous green light Active OK
Continuous red light Active NOK
Flashing light Green –
low frequency Energy saver mode
Off Sleep
If linking is selected on the controller:
Green flashing light –
high frequency Active/Setting: Linking Linking OK
Flashing red light Active/Setting: Linking Linking NOK
Do not interrupt programming by disconnecting the power supply during this phase.