Cleco 17BP, Инструкция по эксплуатации

Страница: 33 / 64

2291c-enu_LCD_bedingt.fm, 25.08.2017
P1890E/EN 2017-06 33
LCD display
8
Displays the tool ID and allows you to configure settings.
You can select a channel from 1 – 4.

Start button>: show tool ID (default: 1).
 <F1>: Activate a lower network ID.
 <F2>: Activate a higher network ID.
 Press the start button or <F2> longer than 2
seconds to accept the selection and display the next menu item.
 Press <F1> longer than 2 seconds
to delete the selection and exit the menu.
Each tool can be used only once for each base station.
Displays the transmission power and allows you to configure settings.
5 transmission power settings are available.
Displays the transmission power and allows you to configure settings.
 <Start button>: show power settings on display (default: maximum).
 <F1>: Activate a lower transmission power.
 <F2>: Activate a higher transmission power.

Press the start button or <F2> longer than 2
seconds to accept the selection and display the next menu item.
 Press <F1> longer than 2 seconds
to delete the selection and exit the menu.
Display Transmission
power
dBm
Transmission
power
mW
0 1
-2 0.63
-4 0.40
-6 0.25
-10 0.10
Displays the data transmission encryption.
AES = Advanced Encryption Standard, code length = 128 bit.
RF15.4
Tool
ID
RF15.4
Power
Power
RF15.4
AES