Cleco 17BP, Инструкция по эксплуатации

Страница: 47 / 64

2291e-en_TroubleShooting_bedingt.fm, 25.08.2017
P1890E/EN 2013-08 47
Troubleshooting
10
10.1 Reset tool
This key combination activates the Service menu. Here, the tool can be shut off or reset to the delivery set-
tings.
The following will then be deleted:
•
the internal memory (programming)
• the current fastening job
• rundown data not yet transmitted to the control
Once selected, there is no way back to the current fastening job.
1. 2. 3. 4.

Press <F1>+<F2> at
the same time and
hold.

Press start button 1×
and release.

Release <F2>.

Keep <F1> pressed
and continue with step
3.

Press <F2> 3× and
release.

Keep <F1> pressed
and continue with step
4.

Press start button 1x.

Release both buttons.
5. Switch off 5. Reset

Change to the Service menu with <F1>, <F2>.
Select within 60 seconds or else the tool with switch off:

Confirm with the start button and switch the tool off.
or…
 Confirm with the start button and reset the tool to the
delivery settings.
ATTENTION!
<F2>
Start
<F1>
<F1>
<F2>
<F1>
Start
<F1>
<Servi
Dis
Able
>Servi
Reset