Cleco 17BP, Инструкция по эксплуатации

Страница: 6 / 64

6
2278SHa_Tool_EN.fm, 25.08.2017
parts repaired before using the tool. Many accidents
are caused by poorly maintained electric tools.
f) Use electric tools, accessories, insertion tools, etc.
in accordance with these instructions. Take into
account the work conditions and the job to be done.
The use of electric tools for applications other that those
intended can lead to a dangerous situation.
5 Service
a)
1)
Only have your electric tool repaired by a quali-
fied specialist and only using original replacement
parts.
This will ensure that the safety of the electric tool
is maintained.
Specific safety instructions for
electric hand-held nutrunners
b) Our insulation is not insulation in the sense of VDE
standards:
Hold the device at the insulated handle sur-
faces when you perform work where the screw can
strike hidden power lines or your own power cable.
Contact between the screw and a live power line could
energize metal parts of the tool and cause an electric
shock.
c) 18ET/EC, 48ET/EC: By accidentally pressing the start
button, the drive socket can rotate in the right angle
nutrunner attachment (e.g., when putting aside the
tool). There is a risk that fingers may be crushed or sev-
ered in the process. Never reach into the drive socket.
To change the drive socket, unplug the tool cable.
d) Hold the tool firmly. Be prepared for alternating counter
torques.
e) For applications of the tool in limited spaces and
torques over
•
4 Nm, straight tools
• 10 Nm, pistol-type tools
• 60 Nm, angle tools
always use a reaction bar. Never rest your hand on the
reaction bar when working.
f) Check that the suspension bail is properly secured to
the balancer.
Tools with integrated barcode scanner
• Do not look into the laser beam.
• Repair faults on optical parts at once.
• Changes to the barcode scanner are prohibited.
• Take defective tools out of operation immediately.
6 Use and handling of the electric hand-held
nutrunner
a) Only use screw bits for machine-controlled tools.
b) Make sure that the screw bits are securely inserted.
c) Do not attach screw bit to the screw head at an angle.
d) Inspect screw bits for visible damage and cracks.
Replace damaged screw bits immediately.
e) Disconnect the tool from the power supply before
changing the screw bits.
f) Never use a high-pressure cleaner/jet to clean the tool.
g) Do not immerse the tool in cleaning agents.
h) Cordless EC tools: Do not open the battery pack.
1. Due to their vocational training, knowledge, expe-
rience and understanding of the circumstances
involved in this kind of work, suitably qualified per-
sonnel are able to identify potential hazards and to
initiate appropriate safety measures. Qualified per-
sonnel are obliged to comply with regulations.
Class 2 laser product
Class 2 laser scanners use a laser diode that
produces a low-power visible light beam that
is comparable to a very bright source of light,
such as the sun.
Doing so can cause damage to the eyes.
EN