Cleco 17BP, Инструкция по эксплуатации

Страница: 25 / 64

2291c-enu_LCD_bedingt.fm, 25.08.2017
P1890E/EN 2017-06 25
LCD display
8
8.3 Operating menu
8.3.1 General
The operating menu on the tool is divided into a main menu and submenus. You can navigate through the
menus using the two function keys below the LCD display. In the following description, <F1> is used for the
left function key and <F2> is used for the right function key. The menu is activated by pressing the right
function key, <F2>. The menus can be disabled by configuring appropriate parameter in the controller.
Basic functions:
 <F2>: Activate main menu.
 <F1>: Go to previous menu item.
 <F2>: Go to next menu item.
 Press <F1> longer than 2 seconds
to go to the next higher menu level. If the main menu is activated, the system goes into production
mode.
 Press the start button or <F2> longer than 2 seconds
to activated the highlighted item or execute the highlighted action. Actions that start the tool can be car-
ried out only by pressing the start button.

If the menu is enabled, no rundowns are possible.
 At the end of each submenu there is an entry for Back .
Enables the main menu.
Back