Cleco 17BP, Инструкция по эксплуатации

Страница: 8 / 64

Warnings and notices
2
8 P1890E/EN 2017-06
2291b-en_1_3_bedingt.fm, 25.08.2017
2 Warnings and notices
Warning notices are identified by a signal word and a pictogram:
•
The signal word describes the severity and the probability of the impending danger.
• The pictogram describes the type of danger.
2.1 Symbols on the product
Be sure that you understand their meaning before operation
2.2 Operator training
All operators must be trained and experienced before operating the tool. The tool may only be repaired by
authorized personnel.
WARNING!
A symbol combined with the word WARNING indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
CAUTION!
A symbol combined with the word CAUTION indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury or environmental damage.
General notices
include application tips and useful information but no hazard warnings.
Class 2 laser product
Class 2 laser scanners use a laser diode that produces a low-power visible light beam that is comparable to
a very bright source of light, such as the sun.
Do not look into the laser beam when the laser is on.
Doing so can cause damage to the eyes.
CE compliant
The product corresponds to the prescribed technical requirements in Europe.
Read all instructions.
Observe generally valid disposal guidelines such as, in Germany, the Electrical and Electronic Equipment
Act (ElektroG) and the Battery Act (BattG).
 Wasted rechargeable batteries must be disposed of. Return the tool and defective/power supplies to
your company collection facility or to
Sales & Service Centers .
Eurasia compliant
The product corresponds to the prescribed technical requirements in Russia, Belarus and Kazakhstan.